SGM7F Direct Drive
Breadcrumb
Navigation Menu
SGM7F Direct Drive
SGM7F Direct Drive
SGM7F-Direct-Drive - YAIMOB
![](https://www.yaskawa.com/documents/20197/1158080/sgm7f-dd-motor-200x150.jpg/d393b9f2-b9f7-4d37-baa2-c536d81f7763?version=1.0&t=1684791536063)
2-35Nm torque, compact size for easy application
Directly connect a load to SGM7F and get backlash-free torsional stiffness in a compact package that makes application easier. An iron core design is coupled with a high resolution 24-bit encoder to achieve highly accurate indexing. A smaller size and low heat generation make SGM7F easier to implement in existing machine designs.
TemplateWeb
eLearning Curriculum
Showing 1 to 16 of 16 entries.
Title/Number | File(s) | Rev Date | |
---|---|---|---|
eLearning Module: SigmaSelect Overview eLM.Servo.04.Sizing_Overview![]() Rev Date:10/02/2019 ![]()
|
![]() |
10/02/2019 | |
eLearning Module: Servo Sizing Rotary Table eLM.Servo.05.Sizing_ROT_TBL![]() Rev Date:10/02/2019 ![]()
|
![]() |
10/02/2019 | |
eLearning Module: Servo Sizing Linear Ballscrew eLM.Servo.06.Sizing_BALLSCRW![]() Rev Date:10/02/2019 ![]()
|
![]() |
10/02/2019 | |
eLearning Module: Servo Sizing Roll Feeder eLM.Servo.07.Sizing ROL_FED![]() Rev Date:10/02/2019 ![]()
|
![]() |
10/02/2019 | |
eLearining Video: Direct Drive Servos eLV.DirectDrive.01.TechIntro![]() Rev Date:10/21/2021 ![]()
|
![]() |
10/21/2021 | |
eLearining Video: Yaskawa Direct Drive Motors eLV.DirectDrive.02.ProductLine![]() Rev Date:09/03/2021 ![]()
|
![]() |
09/03/2021 | |
eLearining Video: Servo Sizing Demystified eLV.Servo.01.SizDemystify![]() Rev Date:04/20/2021 ![]()
|
![]() |
04/20/2021 | |
eLearning Video: Sigma-7 400V New Product Introduction eLV.Sigma7.01.400v.ProdIntro![]() Rev Date:02/07/2018 ![]()
|
![]() |
02/07/2018 | |
eLearning Video: Servo Tuning - Stop High Pitched Sounds eLV.Sigma7.01.Notch![]() Rev Date:01/13/2022 ![]()
|
![]() |
01/13/2022 | |
eLearning Video: Sigma-7 Startup eLV.Sigma7.01.Startup![]() Rev Date:03/01/2021 ![]()
|
![]() |
03/01/2021 | |
eLearning Video: Servo Tuning - Stop Resonant Sounds eLV.Sigma7.02.AntiRes![]() Rev Date:01/18/2022 ![]()
|
![]() |
01/18/2022 | |
eLearning Video: Servo Tuning - Suppress Load Vibration eLV.Sigma7.03.VibSup![]() Rev Date:01/13/2022 ![]()
|
![]() |
01/13/2022 | |
eLearning Video: Servo Tuning - Suppress Two Vibration Frequencies eLV.Sigma7.04.VibSup2Freq![]() Rev Date:01/18/2022 ![]()
|
![]() |
01/18/2022 | |
eLearning Video: Servo Tuning - Minimize Settling Time eLV.Sigma7.05.SettlingTime![]() Rev Date:01/18/2022 ![]()
|
![]() |
01/18/2022 | |
eLearning Video: Servo Tuning - Minimize Position Error eLV.Sigma7.06.PosError![]() Rev Date:01/18/2022 ![]()
|
![]() |
01/18/2022 | |
eLearning Video: Servo Tuning - Estimate High Inertia Loads eLV.Sigma7.07.DDJcalc![]() Rev Date:06/24/2022 ![]()
|
![]() |
06/24/2022 | |
Showing 1 to 16 of 16 entries.