Z1000U Matrix Drive

Z1000U Matrix Drive - LH - YAIMOB

7.5 to 350 HP

The Z1000U Matrix Drive incorporates matrix technology to directly convert input AC voltage to output AC voltage. The drive is ideally suited for HVAC applications providing extremely low harmonic distortion, energy savings, and serviceability in a space-saving design.

Our Z1000U Matrix Drive was Product of the Year by Consulting-Specifying Engineer.

For more product packages, see Z1000U Matrix Configured or Z1000U Matrix Bypass.

TemplateWeb

FAQs

Sort by :

Expand All

Didn't find what you were looking for? Try solutioncenter.yaskawa.com

Showing 1 to 6 of 6 entries.

Question	Posted Date
What network protocols does the Z1000U support? Posted Date: 01/21/2015 Answer: The Z1000U contains embedded protocols for Modbus, Metasys, APOGEE, and BACNet. Additionally the same Lonworks card that is used on the standard Z1000 is supported on the Z1000U. Product Group/Line: Inverter Drives, Z1000U Matrix Drive Topic/Sub Topic: Ask a Technical Question, Network Communications, Product Launch Document Number: INV-KA1W74 Published Date: 01/21/2015	01/21/2015
What is the warranty determination for new product? Posted Date: 05/22/2014 Answer: 1. Yaskawa America, Inc (YAI, Drives & Motion Division (hereinafter D&M), warrants at the time of shipment, new and unused product sold by D&M shall be free from defects in materials and workmanship. D&M warrants that for a period of one (1) year from the date the product is first used by Buyer, or 18 months from the date of shipment, whichever occurs first, if any product or part is found by D&M to be defective, D&M will, at its sole discretion and as Buyer's exclusive remedy, either repair, replace or return the purchase price paid to D&M; provided that the subject product is used under normal conditions for which it was designed and installed, operated and maintained in accordance with D&M's instructions and in accordance with generally accepted industrial practices. Products repaired or replaced during the warranty period shall be covered by the foregoing warranty for the remainder of the original warranty period or ninety (90) days from date of the repair or shipment of the replacement, whichever is longer. D&M warrants, for a period of ninety (90) days, that services shall be performed in a workmanlike manner. Buyer's sole remedy for a breach of this service warranty is limited to further service or a refund or credit of amounts paid by Buyer, at Seller's option. 2. D&M's warranty obligation shall be conditioned upon receipt by D&M of written notice of any alleged defects within sixty (60) days after discovery. D&M will not be responsible for unauthorized repairs to any products, even if defective. D&M shall not be responsible for any products which have been altered, abused, misused, or improperly installed or repaired, or for any loss, damage, defect, claim or non-performance resulting from or attributable to Buyer's specifications. D&M does not guarantee production rates or the quality of goods made using D&M's products or services, nor shall any longer warranty periods apply, except as agreed in writing signed by an authorized D&M representative. 3. Where Buyer orders non-stock products or parts manufactured by a third-party, D&M will, to the extent permitted, pass through to Buyer any warranty of the manufacturer. As to such items, Buyer's sole remedy for breach of warranty shall be the remedy offered by and available from the manufacturer, if any. 4. D&M's warranty herein is in lieu of and excludes all other warranties of D&M and any parent or affiliated companies of D&M. D&M disclaims all other warranties, whether express, implied or statutory, including, but not limited to, any implied warranties of merchantability and/or fitness for a particular purpose or use. 5. Under no circumstances shall D&M, or any parent or affiliated company of D&M, be liable to buyer or any entity for any special, indirect or consequential damages, whether arising from breach of contract, tort, negligence, misrepresentation, strict liability or otherwise, including for lost profits, impairment of goods, work stoppage or otherwise, in any way arising out of or related to products or services supplied by D&M or any transaction to which these standard terms apply. The maximum liability of D&M, including, but not limited to, with respect to the design, manufacture, sale, delivery, resale, inspection, assembly, installation, testing, repair, replacement, maintenance or use of any product or the performance of any service, shall not exceed the purchase price paid to D&M. Product Group/Line: Inverter Drives, Controllers, Servo Products, General Controllers, General Inverter Drives, General Servo, MP2300Siec, MP2310iec, MP2600iec, MP2200, MP2300, MP3200iec, MP3300iec, Yaskawa Remote IO Modules, A1000 Configured, A1000 Drive, D1000 Regenerative Converter, G7 Drive, iQpump Micro, iQpump Micro Configured, iQpump1000, iQpump1000 Bypass, iQpump1000 Configured, J1000 Drive, L1000A Drive, L1000E Drive, MV1000 Drive, P1000 Drive, R1000 Regenerative Unit, U1000 Industrial Matrix Drive, U1000 Oil and Gas MATRIX Drive, V1000 Drive, V1000-4X Drive, Z1000 Bypass, Z1000 Configured, Z1000 Drive, Z1000 Redundant, Z1000U Matrix Bypass, Z1000U Matrix Configured, Z1000U Matrix Drive, SGDV Analog, SGDV EtherCAT, SGDV MECHATROLINK-II, SGDV MECHATROLINK-III, SGDV MP2600iec, SGDV SigmaLogic, SGLF Series, SGLG Series, SGLT Series, SGMAV Sigma-5, SGMCS Direct Drive, SGMGV Sigma-5, SGMJV Sigma-5, SGMMV Sigma-5 Mini, SGMPH Sigma II, SGMSV Sigma-5, SGMVV Sigma-5, SGT Sigma Trac, SJDE Junma, SJME Junma, SLIO Modules, SGM7E Direct Drive, SGM7D Direct Drive, SGM7F Direct Drive Topic/Sub Topic: Ask a Technical Question, Warranty Document Number: DRV-9BJPJ9 Published Date: 05/22/2014	05/22/2014
What is California's Proposition 65? Posted Date: 06/01/2020 Answer: California Proposition 65 is a standalone program that affects commercial goods sold in the state of CA. This was enacted in 1986 as "The safe Drinking Water and Toxic Enforcement Act of 1986". Businesses, including manufacturers, producers, packagers, importers, suppliers and distributors, are required to provide warnings required under the California Code of Regulations (the “Code”) if their products or facilities can expose consumers or workers to a listed chemical above identified threshold levels, known to the state of California to cause cancer or reproductive harm. The chemical list contains more than 900 substances, and this list is updated every year. Read Full Policy Product Group/Line: Controllers, Inverter Drives, Servo Products, Spindle Products, General Servo, General Spindle, General Controllers, MP3300iec, Sigma-7Siec, MP3300iec-RBT, Panel PC, smartPanel, SLIO Modules, Yaskawa Remote IO Modules, MP3200, General Inverter Drives, GA800 Drive, GA800 Configured, A1000 Drive, A1000 Configured, U1000 Industrial Matrix Drive, G7 Drive, GA500 Drive, V1000 Drive, V1000-4X Drive, J1000 Drive, P1000 Drive, P1000 Bypass, P1000 Configured, Z1000 Drive, Z1000 Bypass, Z1000 Configured, Z1000 Redundant, Z1000U Matrix Drive, Z1000U Matrix Bypass, Z1000U Matrix Configured, iQpump1000, iQpump1000 Bypass, iQpump1000 Configured, iQpump Micro, iQpump Micro Configured, U1000 iQpump, U1000 iQpump Configured, L1000A Drive, L1000E Drive, D1000 Regenerative Converter, R1000 Regenerative Unit, MV1000 Drive, MV1000 NEMA 3R, SGD7W Mechatrolink-III, SGD7S Mechatrolink-III, SGD7W EtherCAT, SGD7S EtherCAT, SGD7S Analog, SGD7S Sigma-7Siec, SGD7S MP2600iec, SigmaLogic7 Compact, SigmaLogic7 Modbus, SGM7J Sigma-7, SGM7A Sigma-7, SGM7P Sigma-7, SGM7G Sigma-7, S7J Gear Motors, S7A Gear Motors, S7P Gear Motors, S7G Gear Motors, SGM7F Direct Drive, SGM7D Direct Drive, SGMCS Direct Drive, SGLF2 Series, SGLG Series, SGLT Series, Sigma Trac II, SGDV MECHATROLINK-III, SGDV MECHATROLINK-II, SGDV EtherCAT, SGDV Analog, SGDV SigmaLogic, SGDV MP2600iec, SGMMV Sigma-5 Mini, SGMJV Sigma-5, SGMAV Sigma-5, SGMGV Sigma-5, SGMSV Sigma-5, SGMVV Sigma-5, SGLF Series, Sigma SD Spindle Drive, Sigma SD Spindle Motor, HV600 Drive, HV600 Enclosed Bypass, HV600 Enclosed Configured, HV600 Narrow Bypass, HV600 Narrow Configured, FP605, SGM7E Direct Drive Topic/Sub Topic: Ask a Technical Question, Environment Document Number: CNT-INV-SRV-SPN-322SVA Published Date: 06/01/2020	06/01/2020
What documentation ships with the Z1000U Matrix? Posted Date: 01/21/2015 Answer: The Z1000U Quick Start Manual (TOEPC71063611) will ship with each Z1000U drive. A comprehensive user manual (TOEPC71063610) is available online. Product Group/Line: Inverter Drives, Z1000U Matrix Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-S882Q3 Published Date: 01/21/2015 Related Files: Z1000U HVAC MATRIX Drive Quick Start Guide Z1000U HVAC MATRIX Drive User Manual	01/21/2015
Has Yaskawa scheduled any Z1000U Factory Training yet? If yes, what are the dates? Posted Date: 01/21/2015 Answer: The existing Z1000 training classes will be modified to include the Z1000U. The application programming class will be updated in March 2015 and the installation and startup class will be updated in April 2015. If you have additional questions, please contact our training department at [email protected]. Product Group/Line: Inverter Drives, Z1000U Matrix Drive Topic/Sub Topic: Ask a Technical Question, Product Launch, Training Document Number: INV-5RWX1Q Published Date: 01/21/2015	01/21/2015
Are there plans for a 600V Z1000U drive? Posted Date: 01/21/2015 Answer: At this time, there is no plan for a 600V offering. Product Group/Line: Inverter Drives, Z1000U Matrix Drive Topic/Sub Topic: Ask a Technical Question, Product Launch Document Number: INV-6B0NHP Published Date: 01/21/2015	01/21/2015

Showing 1 to 6 of 6 entries.

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: dxpprd02:8080

SiteSearch

Yaskawa Main Navigation