P7 Slim Configured Drive

P7 Slim Configured Drive - YAI

5 - 100 HP

The P7S Slim Configured Package provided a P7 in a NEMA 1 enclosure, with space for several commonly used options, such as reactors, input filters, circuit breakers, etc. The P7 and P7S Slim Configured Package were designed for flexibility in providing the features and options commonly specified by facility designers.

TemplateWeb

FAQs

Sort by :

Expand All

Didn't find what you were looking for? Try solutioncenter.yaskawa.com

Showing 2 of 2 results.

Question	Posted Date
When replacing the motor for the application and the heat sink cooling fans. How do I reset Cumulative Motor Operation Time U1-13 and Heat Sink Cooling Fan Operation Time U1-40? Posted Date: 09/16/2013 Answer: When a motor replacement is needed, Cumulative Motor Operation Time (U1-13) can be reset with setting parameter o2-07=000000. When replacing the heat sink cooling fans on the drives, Heat Sink Cooling Fan Operation Time (U1-40) can be reset with setting parameter o2-10=00000. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7BR Package, E7C Drive Configured, E7CR Package, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, F7 Drive, G7 Drive, iQpump 7 Series, iQpump VTC, L7B Drive, P7 Drive, P7B Drive Bypass, P7BR Package, P7C Drive Configured, P7CR Package, P7S Slim Configured Package Topic/Sub Topic: Ask a Technical Question, Maintenance, Motors, Parameters, Repair, Service Document Number: DRV-9BHLXJ Published Date: 09/16/2013	09/16/2013
Does BACnet support more than 128 addresses? Posted Date: 03/12/2024 Answer: BACnet MS/TP master device must have an address between 1 and the Decvice Object Max_Master property, a maximum of 127. All BACnet objects must have an instance identifier that is unique within the device. The Device Object must have an instance identifier that is unique system wide. The Device Object Instance is of type BACnetObjectIndentifier and nust be a value between 1 and 4,194,302. Click on link below for instructions and example of BACnet Device Object Identifier and how its programmed. For more information, refer to AN.AFD.23. Product Group/Line: Inverter Drives, E7 Drive, E7B Drive Bypass, E7BR Package, E7C Drive Configured, E7CR Package, E7E Drive Engineered, E7L Drive Bypass, E7N Narrow Bypass Package, E7S Slim Configured Drive, Network Comms-BACnet, P7 Drive, P7B Drive Bypass, P7BR Package, P7C Drive Configured, P7CR Package, P7S Slim Configured Package Topic/Sub Topic: Ask a Technical Question, Network Communications Document Number: DRV-8WQTNC Published Date: 03/12/2024	03/12/2024

SAFETY PRECAUTIONS AND INSTRUCTIONS FOR USE OF FAQ INFORMATION!

Please read and understand the product instruction manual before installing, servicing or operating Yaskawa products. FAQ content and illustrations are provided as technical advice to augment the information in manual, not supersede it. It is not possible to give detailed instructions for all types of installation or support activities. The information described in the FAQs are subject to change without notice to improve the product or FAQ. Yaskawa assumes no responsibility for errors or omissions or damages resulting from the use of the information contained in any FAQ. All warnings, cautions and product instruction for product use must be followed. Installation, operation and maintenance should be carried out by qualified personnel. Failure to observe these and other precautions highlighted in the product manuals will expose the user to high voltages resulting in, serious injury or death. Qualified personnel are defined as individuals who are familiar with the installation, starting, operation and maintenance of Yaskawa products of the type described and have proper qualifications to perform the work.

Node: dxpprd01:80

SiteSearch

Yaskawa Main Navigation